Let's analyze the causes and solutions of noise generation in the hydraulic system from four aspects. 1.Air intrusion 2. Poor quality of the hydraulic pump or hydraulic motor 3. Improper adjustment of the directional valve 4. The relief valve is unstable.

When designing and laying out pipelines in the hydraulic station system, one should first base it on the hydraulic schematic diagram and comprehensively consider all the connected components, hydraulic systems, three-way joints, and flanges required. The pipeline materials used must have clear initial basis based on the original data. For pipelines with unknown data, they are not allowed to be used.

The disassembly, cleaning and testing of hydraulic components. The hydraulic components are prone to rusting and contamination during transportation or storage. Even new hydraulic components cannot completely eliminate all residual dirt. Uncontaminated hydraulic components should not be disassembled, but they need to undergo functional testing and quality inspection. After the hydraulic system is cleaned, the installation of the hydraulic system is completed. Try to move the system before confirming the pipelines. Perform a cycle of cleaning. The normal operation of the hydraulic system requires extremely strict cleanliness standards. Ensure that the hydraulic pipelines, pipes, valve groups and tanks are clean and free of dirt. Also ensure that the cleanliness of the hydraulic oil meets the requirements.

What components make up a complete custom hydraulic system?A complete custom hydraulic system consists of five components: power elements, actuating elements, control elements, auxiliary elements and hydraulic oil.I. Power Components The function of the hydraulic cylinder power element in the engine

Hydraulic oil is the working medium of the hydraulic transmission system. Generally, it works best within the range of 35-60℃. During the operation of the hydraulic system, pressure loss, solvent loss and mechanical loss will all be converted into heat energy, causing the oil temperature to rise. Ch

The form of the hydraulic pump station designed for the hydraulic station