Parker D1FV Proportional Pressure ReducingValve Series D1FV Proportional Pressure Reducing Valves Are Available with And without Onboard Electronics (OBE).

You are here: Home » Product Category » Hydraulic Components » Hydraulic Valve » Parker D1FV Proportional Pressure ReducingValve Series D1FV Proportional Pressure Reducing Valves Are Available with And without Onboard Electronics (OBE).

Parker D1FV Proportional Pressure ReducingValve Series D1FV Proportional Pressure Reducing Valves Are Available with And without Onboard Electronics (OBE).

Parker D1FV Proportional Pressure ReducingValve Series D1FV Proportional Pressure Reducing Valves Are Available with And without Onboard Electronics (OBE).

Name: Parker D1FV Proportional Pressure ReducingValve Series D1FV Proportional Pressure Reducing Valves Are Available with And without Onboard Electronics (OBE).
Brand: PARKER
Rating: 5.0 (30 reviews)

General Description
Series D1FV proportional pressure reducing valves are
available with and without onboard electronics (OBE).
D1FV OBE
The digital onboard electronics is situated in a robust
metal housing, which allows the usage under rough
environmental conditions.
The nominal values are factory set. The cable for
connection to a serial RS-232 interface is available as
accessory.
D1FV for External Electronics
The parameters can be saved, changed and dupli-
cated in combination with the digital power amplifier
PWD00A-400. The value parameters can be edited
with the common ProPxD software for both versions.
The D1FV values control the pressure in the A- or
B-ports using the barometric feedback principle.
Features
. Barometric feedback
· 3 command options for D1FV OBE: ±10V, 4 .. 20mA,
±20mA

00

. High repeatability from valve to valve

A

· Low hysteresis
· Manual override
· Pressure ranges 25 Bar (363 PSI) and 45 Bar (653 PSI)

Quantity:
Availability:





Inquire Add to Basket

Model:
D1FV
Brand:
PARKER

Product Category

Product Specifications

Ordering Information

Block Diagrams-Wiring

Dimensions

General
Design	Direct operated proportional pressure reducing valve
Actuation	Proportional solenoid
Size	NG6 / CETOP 3/NFPA D03
Mounting Interface	DIN 24340 / ISO 4401 / CETOP RP121 / NFPA
Mounting Position	Jnrestricted
Ambient Temperature[°C]	-20 ... +40; (-4°F ... +104°F)
MTTF. Value[years]	150 (75)
Vibration Resistance[g]	10 Sinus 5 ... 2000 Hz acc. IEC 68-2-6 30 Random noise 20 ... 2000 Hz acc. IEC 68-2-36 15 Shock acc. IEC 68-2-27
Hydraulic
Maximum Operating Pressure	Ports P, A, B 350 Bar (5075 PSI) Port T 185 Bar (2683 PSI)
Maximum Pressure Drop PABT / PBAT	350 Bar (5075 PSI)
Fluid	Hydraulic oil as per DIN 51524 ... 51535, other on request
Fluid Temperature[°C]	-20 ... +40 (-4°F ... +104°F)
Viscosity Permitted [cSt]/[mm2/s] Recommended[cSt]/[mm2/s]	20 ... 380 (93 ... 1761 SSU) 30 ... 80 (139 ... 371 SSU)
Filtration	ISO 4406 (1999) 18/16/13 (acc. NAS 1638: 7)
Maximum Flow	10 LPM (2.6 GPM)
Minimum Primary Pressure	30 Bar (435 PSI)
Static / Dynamic
Hysteresis [%]	<4
Temperature Drift Solenoid Current [%/K]	<0.02
Electrical
Duty Ratio [%]	100 ED; CAUTION: Coil temperature up to 150°C (302°F) possible
Protection Class	Standard (as per EN175301-803) IP65 in accordance with EN60529 (with correctly mounted olug-in connector); DT04-2P "Deutsch" IP69K (with correctly mounted plug-in connector)
Supply Voltage [V]	12
Current Consumption [A]	2.2
Resistance [Ohm]	4.4
Coil Insulation Class	F (155 °C) (311°F)
Solenoid Connection	Connector as per EN 175301-803 (code W), DT04-2P "Deutsch“ connector (code J). Solenoid identification as per ISO 9461.
Wiring Minimum [mm2]	3x1.5 (AWG 16) overall braid shield (Code W), "Deutsch" connector DP4 2-Pin (Code J)
Wiring Length Maximum [m]	50 (164 ft.) recommended