How To Solve The Problem of Oil Leakage in Custom Hydraulic Systems

How to solve the problem of oil leakage in custom hydraulic systems

In custom hydraulic systems, the leakage of hydraulic oil is a common type of fault. Regarding the solution to this fault, it actually varies. Different solutions must be adopted based on different causes of leakage. So in a hydraulic system, there is oil leakage.

1. For the oil leakage caused by the design flaws of the components. This kind of fault can usually be solved by using more precisely sized hydraulic components, such as cylinders, seals, oil valves, etc. This plays a decisive role in whether the hydraulic system will experience leakage. At the same time, during transportation, installation and debugging, it is also necessary to pay attention to preventing scratches or damages to the surfaces of the parts and seals.

2. For leaks caused by external force impacts, this situation can be addressed by taking certain protective measures for the hydraulic system externally, and installing shock-absorbing brackets to protect the pipelines from external impacts. Moreover, the number of disassembly operations for each joint should be reduced, and welding should be used as much as possible to connect some important joints.

III. Leakage caused by wear of hydraulic components. The solution to this problem can be achieved by reducing the movement speed of the piston rod, or by installing appropriate filters. This makes the process of cleaning the oil tank simpler. At the same time, it can also reduce the wear of the sealing components and the service life of the seals.

The above points are the solutions to the problem of oil leakage in the hydraulic system. Therefore, it is impossible to completely prevent oil leakage. Only by taking various measures and using the equipment strictly in accordance with the correct operating procedures can the occurrence of leakage faults be reduced.